What Is the Process of Floor Refinishing in Vancouver?
- Admin
- 2 days ago
- 3 min read
If your hardwood floors look dull, scratched, or worn, floor refinishing is the best way to restore their natural beauty. Vancouver homeowners often choose refinishing instead of replacing floors because it is more affordable and brings floors back to a like-new condition.
In this guide, you'll learn the entire floor refinishing process in Vancouver, how long it takes, what equipment is used, and why many homeowners trust Tango Home Reno and Flooring for professional refinishing services.
Why Floor Refinishing Is Popular in Vancouver
Vancouver’s climate — rainy winters and humid conditions — causes hardwood floors to:
Fade over time
Develop scratches
Show water spots
Lose shine
Wear down in high-traffic areas
Refinishing solves these issues by removing the old finish and applying a new protective layer.
👉 More about refinishing: Hardwood Floor Sanding in Vancouverhttps://tangoconstruction.ca/hardwood-floor-sanding-vancouver
Floor Refinishing Process in Vancouver (Step-by-Step)
1. Initial Inspection & Preparation
A technician examines:
Wood species
Floor condition
Scratches, gouges, and wear
Subfloor stability
Moisture levels
Preparation includes:
✔ Moving furniture✔ Protecting adjacent rooms✔ Sealing off dust areas
2. Sanding the Hardwood Floors
This is the most important phase.
Steps:
Coarse sanding – removes old finish
Medium sanding – smooths the surface
Fine sanding – creates a uniform finish
Professional sanding equipment ensures a smooth, even surface.
3. Dust Collection & Deep Cleaning
Even with dustless systems, fine dust settles.
Technicians will:✔ Vacuum the entire area✔ Wipe down surfaces✔ Prep the floor before staining
4. Staining the Floor (Optional)
Choose from many colours:
Natural
Honey
Grey
Walnut
Espresso
Custom blends
Staining is optional but can completely transform the room.
5. Applying Finish Coats
Finish protects the hardwood and enhances durability.
Common finishes used in Vancouver homes:
Water-based polyurethane (low odour, fast drying)
Oil-based polyurethane (strong protection, warm tone)
Hard-wax oils (matte, natural look)
Typically applied:
✔ 2–3 coats must fully dry before the next is applied.
6. Final Buffing & Inspection
Technicians inspect the entire floor and buff lightly for an even sheen.
You’ll receive care instructions such as:
When to walk on the floor
When to move furniture
Best cleaning products
How to maintain the new finish
How Long Does Floor Refinishing Take in Vancouver?
Average timeline: 2–4 days
Depending on:
Finish type
Stain choice
Humidity
Size of home
Cost of Floor Refinishing in Vancouver (2025)
Service | Average Cost per sq. ft. |
Sanding + refinishing | $4 – $8 |
Staining | $1 – $2 |
Repairs | $50 – $300 |
Prices vary depending on floor condition and complexity.
When You Should Refinish Your Floors
✔ Deep scratches
✔ Dull or cloudy finish
✔ Water stains
✔ Bare wood showing
✔ Discoloured areas
✔ Uneven appearance
If your floor shows any of these signs, refinishing is the solution.
Why Homeowners Choose Tango for Refinishing in Vancouver
Tango offers:✔ Professional sanding machines✔ Smooth, even finishes✔ Dust-controlled refinishing✔ Beautiful stain options✔ Licensed & insured technicians✔ Fast turnaround time✔ Clean and respectful service
📞 Call for refinishing services: (778) 558-9090
👉 Explore more:Floor Leveling Services in BChttps://tangoconstruction.ca/floor-leveling-bc
Conclusion
The floor refinishing process in Vancouver involves sanding, staining, coating, and polishing to make hardwood floors look brand new again. With the right equipment and professional execution, refinishing can dramatically improve your home’s appearance.
If your floors are dull or damaged, Tango Home Reno and Flooring can restore them with beautiful, long-lasting results.
📞 Call today: (778) 558-9090
Comments